Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
[ad_1]
Halo Microelectronics has launched a sequence of dynamic voltage scaling buck converters that may be optimized to produce voltages throughout totally different subsystems.
Equipment these days, could or not it’s digital or mechanical, consists of a number of subsystems. Think about any good equipment and even only a TV, it might encompass a number of tech ideas, like communication tech, processing(analog and/or digital). There are fairly a lot of ideas utilized and every of them require a selected vary of energy.
Halo Microelectronics has launched HL7593 and HL7594 units, a sequence of synchronous buck converters optimized to produce totally different subsystems of moveable functions. The output voltage ranges from 0.600V to 1.394V in 6.25mV steps or 0.27V to 0.6272V in 2.8125mV steps programmed via an I2C interface. The output voltages will be optimized to supply a dynamic voltage scaling (DVS) operate with a programmable slew price. Moreover, a variety of output capacitors can be utilized to optimize Vout stability throughout load transients. Inductors from 0.33µH to 0.47µH could also be used with out affecting loop stability.
At reasonable to mild masses, pulse frequency modulation (PFM) is used to keep up conversion effectivity with a typical non-switching quiescent present of 48µA. Even with such a low quiescent present, the HL759x maintains glorious load and line transient responses. At greater masses, the system routinely switches to fixed-frequency pulse width modulation (PWM) operation at 2.4MHz for minimal VOUT ripple and optimum load transient response. In shutdown mode, the availability present drops beneath 1µA, lowering energy consumption. Moreover, the PFM Mode will be disabled if wanted via the I2C registers.
[ad_2]