CONTEXT studies reversal of pandemic 3D printing traits amid “strong full-year progress” projections

Market insights agency CONTEXT has printed a report indicating that the COVID-19 lockdown-driven gross sales increase seen in consumer-centric 3D printers might be over. 

In its Q1 2022 report, CONTEXT discovered that whereas shipments of the low-cost methods it calls ‘private and equipment & passion printers’ have been up on pre-pandemic ranges, they have been down 25% and 47% on Q1 2021. In contrast, the corporate says shipments of the highest-end 3D printers have been “on the rise and accelerating” within the quarter, reflecting a “whole reversal” of the traits seen throughout 2020’s COVID-19 lockdowns.

Reversing COVID-19 lockdown traits 

As CONTEXT reported in 2020, the pandemic triggered a increase in desktop 3D printing shipments, which soared by 24% between Q1 and Q2 2020 alone. One doable clarification for the variance was the use 3D printers on this class in the course of the first COVID-19 lockdown for a lot of Western nations, a interval wherein designers and makers sought to contribute their abilities and experience within the struggle towards the affect of the illness.

Though CONTEXT’s newest evaluation doesn’t straight reference PPE, the expertise was used extensively in an try to deal with gear shortages, notably in the course of the pandemic’s early levels. Within the case of producers, the likes of PrintParts and PostProcess 3D printed testing swabs to satisfy US demand, whereas Photocentric 3D printed PPE for the NHS, as a part of a multi-million half contract.

Nonetheless, this effort wasn’t simply spearheaded by producers, and engineers have additionally developed 3D printed masks, swabs, ventilator components and different PPE over the past two years. Such gear has been produced so broadly that the FDA has even issued up to date medical 3D printing steerage, to make sure they continue to be clinically-compliant, and it’s on this setting that desktop 3D printing thrived.

Because the scenario round COVID-19 PPE has stabilized, the demand for 3D printed options has additionally dipped, and this pattern is mirrored in CONTEXT’s Q1 2022 report. In its evaluation, the agency says that shipments of low-end machines, these it categorizes as being sub-$2,500 or self-assembled, have been “considerably down” on Q1 2021, however it provides that this decline wasn’t obvious in all purposes.

The training market, specifically, continues to profit from sturdy authorities assist, with the likes of Zortrax and MakerBot just lately gaining from such initiatives. Though the report makes it clear that these installations haven’t impacted gross sales simply but, it means that such subsidies and applications might “provide a shot within the arm,” and “give hope to a market struggling to discover a new accelerant.”

Rising demand for higher-end 3D printers

On the flipside, whereas CONTEXT’s report identifies a decline in demand for low-end 3D printers, it reveals that shipments of “virtually every kind” of business methods price $100,000 or extra grew in Q1 2022. On this class, binder jet machines loved probably the most progress, with shipments rising 113% over Q1 2021. The agency calculates that the expertise solely represents 8% of the metallic 3D printing market, however means that the likes of GE and HP with its Steel Jetting course of, might change this in future. 

On the subject of quantity, the report identifies UnionTech because the chief within the highest-end industrial section, though it did expertise a 6% dip in shipments between Q1 2021 and 2022. This decline, based on CONTEXT, was brought on partially by China’s ‘Zero Covid’ coverage, which has seen many main cities locked down, and it says the nation’s progress is now “more likely to be additional stymied in Q2 2022.” 

Within the $2,500-$20,000 skilled printer class, in the meantime, the corporate’s report reveals that Ultimaker and Formlabs methods accounted for 55% of all these shipped in Q1 2022. CONTEXT discovered that Raise3D and SprintRay skilled higher progress on this space in the course of the interval, however its report additionally emphasizes the importance of “market leaders” within the division’s efficiency, with Ultimaker and MakerBot’s merger now anticipated to be adopted by an ‘growth of their portfolio.’

Lastly, when it comes to designer 3D printers, which CONTEXT categorizes as these offered for $20,000 to $100,000, it discovered that every of the highest ten companies for shipments within the section had seen progress between Q1 and Q2 2022. 3D Techniques noticed its MultiJet Printing shipments rise 53% over this era, whereas Stratasys shipped 44% extra PolyJet machines. Apparently, the report highlights present product strains as being the first driver of the 19% progress achieved within the section throughout Q1 2022, though gross sales generated by way of acquisitions have been additionally credited with enjoying a component.

Shifting forwards, CONTEXT expects industries comparable to aerospace and dentistry to stay key to the expansion of business system producers, with their shipments projected to rise 24% in FY 2022. Within the longer-term, the agency’s report provides that 3D printing’s continued incursions into quantity manufacturing, in addition to its viability as an in-sourcing software, might drive it to a 5-year compound annual progress price of 28%. 

Chris Connery, Head of International Evaluation at CONTEXT, concludes that “regardless of headwinds from components together with international inflation, a slowdown in China’s economic system associated to present COVID mitigation efforts, looming fears of regional recessions, and the continued Russian incursion into Ukraine, producers of business 3D printers stay bullish of their collective outlook for 2022.”

Mapping 3D printing’s trajectory 

In fact, CONTEXT isn’t the one agency that makes a speciality of gathering market insights, and loads of others have additionally printed studies forecasting that 3D printing is in line to realize important progress. Wohlers Associates, which was purchased by ASTM Worldwide final yr, revealed in its 2022 State of 3D Printing Report that the trade has bounced again from the pandemic, and grew by 19.5% in 2021.

AMPOWER’s newest 3D printing report, alternatively, has projected that the 3D printing market will develop at a yearly price of 18.2% over the subsequent 4 years. This growth, the agency anticipates, shall be pushed largely by metallic 3D printing, which it tricks to develop at a price of greater than 25% till 2026, in comparison with the 14.4% progress price anticipated of polymer applied sciences. 

Every so often, wider worldwide organizations additionally contribute their views on the place additive manufacturing is headed as a sophisticated expertise. In February 2022, for example, the World Financial Discussion board claimed 3D printing might obtain a significant leap within the close to future, however provided that it may possibly overcome its adoption roadblocks. 

To remain updated with the newest 3D printing information, don’t neglect to subscribe to the 3D Printing Business e-newsletter or observe us on Twitter or liking our web page on Fb.

For a deeper dive into additive manufacturing, now you can subscribe to our Youtube channel, that includes dialogue, debriefs, and pictures of 3D printing in-action.

Are you on the lookout for a job within the additive manufacturing trade? Go to 3D Printing Jobs for a choice of roles within the trade.

Featured picture reveals a desktop 3D printer farm at UTEP’s Keck Middle. Photograph by way of UTEP/Keck.